![background image](http://html1.mh-extra.com/html/shure/ulxd6-8/ulxd6-8_manual_1262748017.webp)
Shure Incorporated
17/23
1.
2.
3.
1.
2.
3.
•
•
•
•
•
•
•
•
•
•
Encrypting a Single Transmitter to a Single Receiver
From the receiver menu:
DEVICE
UTILITIES
>
ENCRYPTION
>
ON
(Auto)
Press ENTER.
Perform an IR Sync to share the encryption key with the selected transmitter.
Removing Encryption
From the receiver menu:
DEVICE
UTILITIES
>
ENCRYPTION
>
OFF
Press ENTER.
IR Sync the transmitter and receiver to clear the encryption key.
Note:
If multiple transmitters are encrypted to a single receiver, each transmitter must be IR synced to clear the encryption key.
BN and GN OFFSET
BN OFFSET
and
GN OFFSET
compensate for signal level differences between transmitters that share the same receiver
channel. For normal gain adjustments, use the receiver gain buttons.
Set the offset gain on a low signal level transmitter to match a louder transmitter:
IR
PRESETS
>
GOOSENECK
/
BOUNDARY
>
BN
OFFSET
IR
PRESETS
>
GOOSENECK
/
BOUNDARY
>
GN
OFFSET
Transmitter Reset
Hold mute button while powering on transmitter to restore factory settings:
Mute button: Toggle
Mute LED: Active/Mute = Green/Red
Mute LED with MX400R gooseneck: Active/Mute = Red/Off
Initial state from charger: Active
High-pass filter: Off
RF power: 10
mW
Battery type: Alkaline
BN or GN offset: 0
dB
Power lock: Off
Mute LED brightness: Normal
Contact Customer Support