![background image](http://html1.mh-extra.com/html/shure/ulxd6-8/ulxd6-8_manual_1262748016.webp)
Shure Incorporated
16/23
•
•
•
RF Power Setting
System Range
Application
20 mW
>100 m (330 ft.)
For hostile RF environments or longdistance ap
plications
Menu path:
IR
PRESETS
>
GOOSENECK
/
BOUNDARY
>
RF
POWER
Note:
Using the 20 mW setting decreases the transmitter battery runtime and reduces the number of compatible systems.
Locking Transmitter Controls
Boundary and gooseneck base transmitters have a power lock to prevent accidental or unauthorized changes to the transmit
ter. When the power lock is on, the transmitter's power switch is disabled.
To unlock, use receiver front panel or Wireless Workbench.
Menu path:
IR
PRESETS
>
GOOSENECK
/
BOUNDARY
>
POWER
LOCK
Attempting to access a locked feature will display the following message on the receiver front panel:
Setting Initial State From Charger
Use the receiver front panel or Wireless Workbench to control a transmitter's state after you remove it from a networked dock
ing station.
Active: On and passing audio
Muted: On but the audio is muted
Off: Power is off
Menu path:
IR
PRESETS
>
GOOSENECK
/
BOUNDARY
>
INITIAL
STATE
FROM
CHARGER
Note:
If
Mute Button Behavior
is set to Push-to-Talk and
Initial State From Charger
is set to Active, the transmitter will only pass audio when you push the mute
button. Make sure to coordinate settings for
Mute Button Behavior
and
Initial State From Charger
.
Audio Signal Encryption
When encryption is enabled, the receiver generates a unique encryption key which is shared with the transmitter during an IR
sync. Transmitters and receivers that share an encryption key form a protected audio path, preventing unauthorized access
from other receivers.
Enable encryption using Wireless Workbench or the receiver front panel. For more details, see the user guide for your receiver.