![background image](http://html1.mh-extra.com/html/shure/ulxd6-8/ulxd6-8_manual_1262748015.webp)
Shure Incorporated
15/23
3.
4.
5.
•
•
•
•
•
•
On the receiver front panel, hold enter while pressing menu to enter the advanced menu.
Press menu to advance to
Preset bn gn
. The IR window will flash.
Align the transmitter IR window with the receiver to send the presets to the transmitter.
Important:
All QLX-D and ULX-D components must use 2.0 firmware or greater for proper functionality.
Mute/Active Button
The button is configured to toggle between Mute and Active. The following options are available:
Toggle: Press button to mute microphone, press again to pass audio
Push-to-Talk: Hold button to pass audio
Push-to-Mute: Hold button to mute microphone
Disabled: Button functionality off
Change button behavior using Wireless Workbench or the receiver front panel.
Menu path:
IR
PRESETS
>
GOOSENECK
/
BOUNDARY
>
MUTE
BUTTON
BEHAVIOR
Note:
When the mute/active button is set to Disabled, the transmitter will still send TPCI data if the button is pressed.
High-Pass Filter
Each transmitter contains a high-pass filter.
The high-pass filter:
attenuates frequencies below 150 Hz by 12 dB per octave
reduces low-frequency noise caused by table vibration or air handling systems
Adjust high-pass filter settings using Wireless Workbench or the receiver front panel.
Menu path:
IR
PRESETS
>
GOOSENECK
/
BOUNDARY
>
HIGH
PASS
Transmitter RF Power
Reference the following table for setting RF Power:
RF Power Setting
System Range
Application
1 mW
33 m (100 ft.)
For increased channel reuse at close distances
10 mW
100 m (330 ft.)
Typical setups