![background image](http://html1.mh-extra.com/html/shure/ulxd6-8/ulxd6-8_manual_1262748013.webp)
Shure Incorporated
13/23
•
•
•
•
•
•
•
•
•
•
•
1.
2.
3.
4.
1.
2.
3.
Battery Life
10
mW
0:15 to 0:00
Changing Transmitter Settings
Each transmitter has the following adjustable settings:
Mute button and mute LED behavior or brightness
High-pass filter
RF power
Power lock
Initial state from charger
Battery type
Device name
Channel name
Frequency
Normal or High-Density mode
Boundary and gooseneck offset
There are three ways to change transmitter settings:
Wireless Workbench and Networked Docking Station (recommended)
Required equipment:
Networked docking station, computer with Wireless Workbench installed, and transmitter
Place transmitters on charger. Check that charger is connected to network and to Wireless Workbench.
Open the
Item Properties
for the charger in Wireless Workbench.
Select one or multiple transmitters.
Make changes to transmitter settings and click Apply. Transmitters are now ready to use.
Wireless Workbench and IR Sync
Required equipment:
Computer with Wireless Workbench installed, receiver, and transmitter
Ensure that the receiver is connected to the network and to Wireless Workbench.
From Wireless Workbench, access the
Properties Panel
for the receiver.
Navigate to
IR Presets
and set the transmitter parameters.