![background image](http://html.mh-extra.com/html/shure/ua888/ua888_user-manual_1261039003.webp)
– 2 –
ENGLISH
INTRODUCTION
The Shure UA888 Networking Interface System lets you use a computer to monitor and control up to 32 Shure
UHF Wireless receivers from a remote site. The UA888 system is designed for installed sound reinforcement
applications, including theater, larger houses of worship; touring sound systems; and audio/video rental ap-
plications.
System Components
The UA888 Networking Interface System is comprised of a rack-mountable Interface Module, Windows
based software, connecting cables, an IBM compatible PC (not supplied) and Shure U4S or U4D diversity
UHF receivers. The Shure U4 receivers are supplied separately.
System Features
S
Monitor and control* of up to 32 receivers (64
channels maximum when using U4D dual re-
ceivers). Up to 32 channels can be viewed at
one time.
S
rf level monitor function
S
Diversity signal monitor function
S
Audio level monitor
S
Transmitter battery level monitor function
S
Name and label monitor and control
S
Frequency monitor and control functions
S
Frequency group/channel monitor and control
functions (TV channels in U.S. models)
S
Squelch monitor and control functions
S
Receiver lock/unlock function
S
Password controlled computer display
protection
S
“Walk around” plotter function that measures
rf signal strength and identifies ”dead” spots
in the performing area
S
Frequency scanner function that identifies lo-
cal rf activity
S
RS–232 serial interface
S
Shure Link
t
interface to any Shure DSP de-
vices, such as the DFR11EQ
S
Scene creation and storage capability
NOTE: Version 1.5x and earlier U4 receivers will not support all of the above features without an upgrade.
Refer to the Upgrade Kit notification sheet included with the unit or call Shure Brothers Incorporated at
1-800-516-2525.
Minimum Computer Requirements
S
486DX2, 66 MHz, IBM compatible computer;
(Pentium 133 or greater recommended)
S
2.0 MB hard–drive space
S
Windows version 3.1x or later
S
One available RS–232 serial COM port
S
16 MB RAM
S
One RS–232 cable
*NOTE: The “Monitor” feature lets you view various wireless system parameters and observe rf and au-
dio performance, in real time, on the computer monitor. The “Control” feature lets you actually change
receiver parameters from your computer terminal.
Summary of Contents for UA888
Page 22: ... 21 ENGLISH ...