![background image](http://html1.mh-extra.com/html/shure/sound-isolating-se215/sound-isolating-se215_manual_1261429006.webp)
Shure Incorporated
6/9
•
Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product
failure.
Cleaning the Earphone Nozzle
If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is blocked, clear
obstruction by using wire loop end of cleaning tool.
If no obstruction is found or if sound quality does not improve, replace the sleeve with a new sleeve.
Caution:
When cleaning, do not force any object through the earphone nozzle! This will damage the earphone sound filter.
Warning:
The cleaning tool is only to be used to clean the earphones. Any other use, such as using the tool to clean ears or foam sleeve, could result in injury.
The cable connectors to the earphones may collect debris or other deposits that can affect audio quality. If this happens, disconnect the cables and clean them
using a dry cotton swab.
Specifications
SE215 Earphone
Transducer Type
Single High-Definition MicroDriver
Sensitivity
at 1 kHz
107 dB SPL/mW
Impedance
at 1 kHz
17 Ω
Noise Attenuation
up to 37 dB
Frequency Range
SE215 Special Edition
21 Hz–17.5 kHz
SE215
22 Hz–17.5 kHz