![background image](http://html.mh-extra.com/html/shure/slx-wireless-system/slx-wireless-system_user-manual_1262124010.webp)
10
SLX
Working Range
Line of Sight
100 m (300 ft)
Note: Actual range depends on RF signal
absorption, reflection and interference.
Audio Frequency Response
45–15000 Hz
Note: Dependent on microphone type
Total Harmonic Distortion
Ref. ±38 kHz deviation with 1 kHz tone
<0.5%, typical
Dynamic Range
>100 dB, A-weighted
Operating Temperature Range
-18°C (0°F) to +50°C (122°F)
Note: Battery characteristics may limit
this range.
Transmitter Audio Polarity
Positive pressure on microphone dia-
phragm (or positive voltage applied to tip
of WA302 phone plug) produces positive
voltage on pin 2 (with respect to pin 3 of
low-impedance output) and the tip of the
high impedance 1/4-inch output.
SLX1
Audio Input Level
gain position
mic:
−10 dBV maximum
0dB:
+10 dBV maximum
–10dB:
+20 dBV maximum
Gain Adjustment Range
30 dB
Input Impedance
1 MΩ
RF Output Power
10–30 mW
varies by region
Pin Assignments
TA4M
1:
ground (cable shield)
2:
+ 5 V Bias
3:
audio
4:
Tied through active
load to ground (On
instrument adapter
cable, pin 4 floats)
Dimensions
108mm x 64mm x 19mm (H x W x D)
Weight
81 g (3 oz.), without batteries
Housing
galvanized steel
Power Requirements
2 “AA” size alkaline or rechargeable
batteries
Battery Life
up to 8 hours (alkaline)
SLX2
Maximum Input Level
at –10 dB gain setting:
+2 dBV
at 0 dB gain setting:
–8 dBV
Gain Adjustment Range
10 dB
RF Output Power
10–30 mW
varies by region
Dimensions
254mm X 51mm dia. (10 X 2in.)
Weight
290 g (10.2oz.) (without batteries)
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 “AA” size alkaline or rechargeable batteries
Battery Life
up to 8 hours (alkaline)
SLX4
Dimensions
42mm X 197mm X 134mm (H x W x D)
Weight
816 g (1 lb 13oz.)
Housing
galvanized steel
Sensitivity
-105 dBm for 12 dB SINAD, typical
Power Requirements
12–18 V DC @ 150 mA, supplied by ex
-
ternal power supply (tip positive)
Configuration
Impedance balanced
Maximum Audio Output Level
Ref. ±38 kHz deviation with 1 kHz tone
XLR connector:
–13 dBV (into
600 Ω load)
6.35 mm (1/4”)
connector:
–2 dBV (into 3 kΩ
load)
Impedance
XLR connector:
200 Ω
6.35 mm (1/4”)
connector:
1 kΩ
Pin Assignments
XLR connector:
1=ground, 2=audio,
3=no audio
6.35 mm (1/4”)
connector:
Tip=audio,
Ring=no audio,
Sleeve=ground
Image Rejection
>70 dB, typical
Volume Adjustment Range
0 dB to -25 dB
Frequency Range and Transmitter
Output Level
Band
Range
Output Power
G4
470 to 494 MHz
30 mW
G4E
470 to 494 MHz
30 mW
G5
494 to 518 MHz
30 mW
G5E
494 to 518 MHz
30 mW
G8
494.200 to 509.825 MHz
30 mW
H5
518 to 542 MHz
30 mW
J3
572 to 596 MHz
30 mW
L4
638 to 662 MHz
30 mW
L4E
638 to 662 MHz
30 mW
P4
702 to 726 MHz
30 mW
R13
794 to 806 MHz
20 mW
R5
800 to 820 MHz
20 mW
X4
925 to 932 MHz
10 mW
S6
838 to 865 MHz
10 mW
JB
806 to 810 MHz
10 mW
R19
794 to 806 MHz
10 mW
Q4
740 to 752 MHz
10 mW
K3E
606 to 630 MHz
10 mW
NOTE:
This Radio equipment is intended for use in musical professional entertainment and similar
applications.
This Radio apparatus may be capable of operating on some frequencies not authorized in your
region. Please contact your national authority to obtain information on authorized frequencies
and RF power levels for wireless microphone products.