background image

28

Log On Page

This page is only displayed after a password has been set from the 

Preferences tab, establishing an Administrator log in. When there is no 

Administrator, there are no restrictions changing a device’s settings.

Note: No more than five Administrators or Guests should be logged on to 

a device’s GUI at the same time. Opening more instances may degrade 

system performance. 

1) User

When a password is set, there are two levels of access for the GUI:

• Admin: Full editing rights.

• Guest: User can only monitor (cannot change settings).

2) Password

Required for Admin access. The password can be set or cleared on the 

Preferences tab.

3) Keep Me Logged On

When selected, this allows the user to bypass the Log On page when re-

opening the GUI. 

4) Language

Sets the language of the GUI. This setting is saved to the computer’s 

cookies.

Event Log

The event log provides a detailed account of mixer activity from the 

moment the mixer is powered on. The log collects and time-stamps up 

to 1,000 activity entries for the mixer. The Event Log is a reference tool 

for troubleshooting when calling Shure Systems Support or Service 

Department.

The log categorizes entries into Events, Warnings and Errors:

• Events: An action has been successfully completed.

• Warnings: An action can not be completed, though overall mixer 

functionally is stable.

• Errors: Catastrophic problem has occurred that inhibits the mixer’s 

functionality. This corresponds to the 8-bit error codes that flash on the 

front-panel LEDs.

Viewing the Event Log

1. Open the Preferences tab of the GUI.
2. Select the Event Logs link from the Preferences panel. The log is located 

with the device’s DNS name: <device URL>/logs.

Summary of Contents for SCM820-DAN





































Reviews: