![background image](http://html1.mh-extra.com/html/shure/sbc840/sbc840_user-manual_1261223007.webp)
Shure Incorporated
7/13
1.
2.
3.
The charger has no power switch. When plugged in, the power LED illuminates. The charging LEDs illuminate after batteries
are inserted.
Power Save Mode
Use power save mode to charge batteries with the charger’s network functionality off.
Disconnect the power cable from the AC power outlet.
Press and hold storage while reconnecting to the AC power outlet.
When the charge status and error LEDs flash amber, release the button.
The charger remains in power save mode until you power off the charger.
Note:
Transmitters docked with the power switch in the ON position will power on when fully charged. To avoid unwanted audio and unnecessary battery drain,
ensure all transmitters are switched OFF before charging.
Charging
To charge, place batteries into the charging bays with slotted sides down. The LEDs illuminate to indicate battery status.
LED Indicators
Color
State
Charge status LED red
Charging
Charge status LED green
Charging complete
Summary of Contents for SBC840
Page 13: ...Shure Incorporated 13 13...