Shure Incorporated
5/12
◦
◦
◦
◦
Controls and Connectors
①
Power Button
Press to turn on; press and hold to turn off.
②
Reset Button
Docking station reset:
Press and hold reset button while simultaneously powering on the docking station to restore facto
ry settings. IP addressing will be reset to Automatic. LEDs = solid green.
Transmitter reset:
Place transmitters in docks. Press and hold reset button for 5 seconds to restore transmitter factory set
tings. Transmitter mute LEDs = flashing.
③
Power LED
On = Docking station is on
Off = Docking station is off
④
Ethernet Port
Connect to an Ethernet network to enable remote device control and monitoring using Wireless Workbench or other control
software.
⑤
Power Input
Connect to power supply.
⑥
Battery Status LEDs
Each slot has 5 LEDs that illuminate to show the battery's charge level:
LED
% Battery Charge
1
Flashing: <10%
