Shure Incorporated
11/14
Cycle
Displays total number of times that the battery has undergone one full count of discharge and charge. Recharging
after discharging halfway counts as one half of a cycle. Recharging after discharging a quarter of the way counts
as one quarter of a cycle.
Temperature
Displays battery temperature (in Celsius and Fahrenheit) and status.
Charger Network Settings
To adjust charger network settings, open the charger properties panel in Wireless Workbench. Click the gear icon
to set the IP mode and IP address, view the MAC address, and view firmware version.
Connecting to an External Control System
The SBC220 networked charger connects to external control systems such as AMX or Crestron via the Ethernet.
For a comprehensive list of command strings, visit pubs.shure.com/ (http://pubs.shure.com/guide/SBC220).
•
Connection: Ethernet (TCP/IP; SBC220 is the client)
•
Port: 2202
Vertical Mounting
Three mounting points on the bottom of the charger fit #6 round or pan head screws. Mount to a hard surface us
ing 3 screws that are long enough to secure the charger. To mount, orient the charger so that the 2 mounting
points are on top as shown.
Warning:
Only charge SB900 batteries in charger when it is mounted vertically. Do not charge transmitters.
