![background image](http://html1.mh-extra.com/html/shure/pga27/pga27_user-manual_1262046009.webp)
www.shure.com
© 2015 Shure Incorporated
Product Specifications
PGA27 Large Diaphragm Side-Address Condenser Microphone
Overview
Designed with a tailored frequency response for superior reproduction, the PGA27 side-address condenser microphone
features a large cardioid diaphragm, highly durable design and construction and a high SPL threshold for clearly capturing
a wide variety of vocal, acoustic, and amplified sources. Versatile for use in both recording and live performance. Phantom
power required.
Features
•
Large diaphragm cartridge provides wider dynamic range for clear highs and strong lows
•
Cardioid polar pattern picks up audio from the source while rejecting unwanted noise
•
Updated industrial design with black metallic finish and grille for unobtrusive visual presence
•
High-pass filter for additional control of unwanted low-end signal
•
-15dB switchable attenuator for additional SPL versatility
•
Shock mount included for additional set-up stability and minimization of unwanted mechanical noise
•
Padded zipper case included for additional protection during storage or transport
•
Legendary Shure quality design and construction for exceptional performance in rigorous environments
PGA 27
Polar Pattern
Frequency Response
Product Specifications
Available SKUs
Accessories
Type
Electret condenser
Frequency Response
20 to 20,000 Hz
Polar Pattern
Cardioid
Output Impedance
115
ȍ
Sensitivity
at 1 kHz, open circuit voltage
-35 dBV/Pa (17.8 mV)
1 Pa=94 dB SPL
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight
453 g (16 oz.)
Connector
Three-pin professional audio (XLR), male
Operating Temperature
-20 to 165 °F (-29 to 74 °C)
Operating Humidity
Relative
0 to 95%
PGA27-LC
Microphone, shock mount, stand adapter and pouch
A27SM
ShureLock
®
Rubber Isolated Shock Mount
PS-6
Popper Stopper
®
Pop Filter with Adjustible Gooseneck and Stand Clamp
A32WS
Black foam windscreen
31A1856
5/8" to 3/8" thread adapter
C25J
25 ft (7.6 m) XLR-to-XLR cable