6
Optional Accessories and
Replacement Parts
7.6 m (25 ft.) Cable (XLR-XLR)
C25J
5/8" to 3/8" Thread Adapter
31A1856
Vinyl zippered storage bag
95B2324
Drum Microphone Mount
AP56DM
Grille
RPMP52G
PGA57 Replacement Grille
RPMP57G
4.6 m (15 ft.) Cable (XLR-XLR)
95D2153
Wireless Microphone Clip
WA371
Popper Stopper® Pop Filter with Metal
Gooseneck and Microphone Stand Clamp
PS-6
Foam Windscreen for all larger Shure "ball-
type" Microphones available in black, blue,
gray, green, red and yellow
A58WS
Microphone Clip for SM58, SM57, SM87A,
Beta 87A, Beta 87C, PGA57, PGA58, PGA48,
PGA81
A25D
Specifications
PGA52
Type
Dynamic (moving coil)
Frequency Response
50 to 12,000 Hz
Polar Pattern
Cardioid
Output Impedance
150 Ω
Sensitivity
at 1 kHz, open circuit voltage
-55 dBV/Pa¹ (1.75 mV)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with
respect to pin 3
Weight
454 g (16.01oz.)
Connector
Three-pin professional audio (XLR), male
Environmental Conditions
Operating Temperature
-20° to 165°F (-29° to 74°C)
Relative Humidity
0 to 95%
1 Pa=94 dB SPL
60 cm (2 ft.)
10 cm (4 in.)
Typical Frequency Response
1000 Hz
Typical Polar Pattern
Certifications
This product meets the Essential Requirements of all relevant
European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.
shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: [email protected]
Summary of Contents for PGA STUDIO MICROPHONE KIT
Page 7: ......
