Shure Incorporated
16/18
3.
4.
5.
6.
7.
Using your finger to hold the screw assembly in place, slide the MV7 onto the threaded screw and turn the
knob to keep washers in place.
Note:
Be sure to keep this side on but loose so that you have room to easily move the yoke and assemble the washers
on the opposite side.
On the opposite yoke arm, place the washers into the side of the MV7 in reverse order.
Thin
spring
washer
>
Flat
silver
washer
>
Black
plastic
washer
>
Yoke
arm
The yoke arm needs to be placed directly onto the stack of washers. To ensure that the washers are aligned,
put a pen through the yoke and washers to make sure that everything is properly centered. Leave pen in place.
Place the second black plastic washer onto the remaining threaded knob.
Remove the pen. Insert the threaded knob and black plastic washer into the stacked washers and tighten both
sides to ensure that your microphone is stable.
Accessories
Furnished Accessories
10 foot Micro-B to USB-A cable
95A45110
10 foot Micro-B to USB-C cable
95B38076
Replacement Parts
Black Windscreen
AMV7-K-WS
Silver Windscreen
AMV7-S-WS
Optional Accessories
1 m Lightning cable
AMV-LTG
