![background image](http://html.mh-extra.com/html/shure/microflex-mxwani4/microflex-mxwani4_user-manual_1261025064.webp)
Shure Incorporated
64/103
7.
1.
The computer may temporarily lose connection to the control software during the updates process. When the device
has been reconfigured, reopen the software using the Shure Device Discovery application.
Go to
Utility
>
Device
Properties
to manage the interfaces of each MXW device on the network.
Network Audio and Shure Control Data
MXW devices transport two types of data over the network: Shure Control and Network Audio.
Shure Control
The Shure Control carries data for the control software operation, firmware updates and 3rd party control systems (AMX,
Crestron). This data is transported to all MXW components connected to the network.
Network Audio
This network carries both the Dante digital audio and the control data for Dante Controller. This data is transmitted be
tween the APT, the output device and the computer. The network audio requires a wired, gigabit Ethernet connection to
operate.
The two data types are configured differently for each MXW device. Go to
Utility
>
Device
Properties
to view and edit
the IP settings for MXW devices.
Network Settings for Each MXW Device
MXW Device
Network Implementation for Audio and Control
Access Point Transceiver
(APT)
Separate IP settings
Audio Network Interface
(ANI)
Shared IP settings
Networked Charging Sta
tion (NCS)
Shure Control settings only. (The NCS does not transport network audio.)
Manually Assigning Static IP Address
To manually assign IP addresses to the MXW system, follow these steps:
Open the Utility tab.