![background image](http://html1.mh-extra.com/html/shure/microflex-mxw/microflex-mxw_quick-start-manual_1262375007.webp)
7
Power
Provide power and turn on components.
The LEDs illuminate on each component when power is on.
Component
Power Source
① ANI
Connect the IEC cable to an AC power
supply and turn on the power switch.
② APT
Connect to Port 1 of the ANI for Power
over Ethernet (PoE). There is no power
switch.
③ NCS
Connect the PS45 to an AC power supply
and turn on the power switch.
④ Transmitters
Charge the transmitters to full before use.
②
①
②
③
④
①
7
8
6
5
1
2
3
4
7
8
6
5
1
2
3
4
7
8
6
5
1
2
3
4
③
Class 0 PoE
1. Install the Shure Web Device Discovery application.
Download the Shure Web Device Discovery Application from www.shure.com
or from the USB stick supplied with the MXW Access Point Transceiver. (The
required Bonjour device discovery tool is bundled with the application and will install
automatically.)
2. Ensure the computer is on the MXW network.
The computer accesses the control software from an embedded web server on the
device. All networked devices must be connected to the same network (set to the
same subnet).
3. Turn off WiFi
Turn off the PC's WiFi to force the wired network interface.
4. Launch the Shure Web Device Discovery application.
Open the application to view all Shure devices on the network that feature an
embedded server for control software (MXWAPT, MXWANI and SCM820). Use the
Identify button to flash a device's LEDs for easy identification.
5. Open the MXW Control Software
Double-click on any Access Point Transceiver to open the MXW System control
software. Double click on an Audio Network Interface to open that device's software
interface. The application can open the Control Software by IP address or DNS
name (selectable from the Preferences drop-down).
6. Enter Default Password
Enter the default password 'admin' to access the control software.
7. Bookmark the Webpage (recommended)
Bookmark the IP address of the device when it is set to a Static IP address.
Bookmark the device's DNS name when the IP mode is set to Automatic (DHCP).
Accessing the MXW Control Software
The MXW system uses a device-hosted control software that enables comprehensive remote control of key setup, monitoring and management functions.
The software is accessible from any PC or Mac on the network, and opens in a web-browser using Adobe
®
Flash
®
.
There are two different control interfaces for the MXW system:
• MXW System control software: Accessed from the Access Point Transceiver and used for managing the MXW system.
• Audio Network Interface control software: Accessed from the Audio Network Interface and used for managing that device only.
Follow these steps for accessing MXW control software:
④
③
②
MXWANI8
mxwani8-ffeee5.local
192.168.200.22
Dante
Dante
ROOM 5
MXWAPT8
mxwapt8-ffaaa2.local
192.168.200.23
CONFERENCE
④
①
⑦
⑥
admin
MXWANI8
mxwani8-ffeee5.local
192.168.200.22
Dante
Dante
ROOM 5
MXWAPT8
mxwapt8-ffaaa2.local
192.168.200.23
CONFERENCE
⑤
mxwani-aa1.local
192-168-200-22
ANI 1
mxwapt8-ffe761.local
192-168-200-23
APT 1
Name
DNS name
IP Address
Wi-Fi
lockout
power
ethernet
network audio
push to solo | hold to mute
-9
-18
-24
-36
-48
-60
0
-9
-12
-18
-24
0
aux
mic
adjust
line
sig/clip
mute
INPUT
A
sig/clip
mute
OUTPUT
HEADPHONE
Audio Network Interface
B
1
2
3
4
5
6
7
8
line
aux
MICROFLEX WIRELESS
AUX IN
MASTER
lockout
power
ethernet
network audio
automix link
dual mixer
LIM
A
B
-9
-18
-24
-36
-48
-60
0
gain
limiter
L+R SUM
gain
low cut
hi shelf
meter
push to solo | hold to mute
1
2
3
4
5
6
7
8
A B
HEADPHONE
IntelliMix
SCM820
®
Summary of Contents for MICROFLEX MXW
