![background image](http://html1.mh-extra.com/html/shure/microflex-advance-mxa910/microflex-advance-mxa910_manual_1261880029.webp)
Shure Incorporated
29/59
•
•
1.
2.
3.
4.
Suspension Mounting
①
Wire Suspension Hanging Points (4 mm hole size)
②
VESA Mounting Holes
4-Point Wire Suspension
Secure the microphone to the ceiling using braided metal cable or other high-strength wire. Use the 4 integrated hanging
points on the back of the microphone to securely attach the cable. The hole size in the hanging points is 4 mm (0.15 in).
VESA Standardized Mounting
The rear plate on the microphone has 4 threaded holes for attaching the microphone to a VESA mounting device. The mount
ing holes follow the VESA MIS-D standard:
Screw specification: M4 thread (Microphone threaded hole depth = 9.15 mm)
Hole spacing: 100 mm (square)
Hard Ceiling Mounting
You can mount the microphone in hard ceilings without a tile grid using the A910-HCM accessory.
Learn more at
Painting Components
The grille and frame of the array microphone can be painted to blend in with room design. Some basic disassembly is required
for painting.
Step 1: Removing the Frame and Grille
Remove the screws that hold the main assembly on the frame (6 screws per side). There are washers between these
screws and the rear panel.
Important:
Do not remove the screws that are farthest in the corner and recessed into the panel (see graphic).
Carefully lift the assembly out of the frame.
Remove the gray plastic LED lightpipe. Leave the black plastic guide in place.
Remove all 4 screws from one side of the frame (see image).
Summary of Contents for Microflex Advance MXA910
Page 28: ...Shure Incorporated 28 59...