background image

DIS  Digital Conference Systems

  DC 6120 P Conference Unit 

•       Chairman and delegate functionality in one unit 
•   Lockable XLR microphone connector 
•   Loudspeaker 
•   Headphone jack with volume control for the floor channel 
•   Exchangeable buttons 

    Description 

  The DC 6120 P is a fully digital portable conference unit in the DIS DCS 6000 
Digital Conference System. 
 The unit can be configured either as a chairman or a delegate unit. The unit's de-
fault configuration is the delegate configuration. 
 To configure the unit, the mute and the microphone button must be kept down 
while pressing the volume up button for 10 seconds for chairman functionality or 
the volume down button for delegate functionality. The button light guides flash 
when the unit is configured and the unit reboots. The configuration is stored in the 
unit so it recalls its configuration if it is used in another system setup. 
 The left button is a function button that changes functionality depending on the 
configuration. The chairman configuration enables 'all delegates off' functionality 
in the left button while the delegate configuration enables 'mute' functionality in the 
left button. 
 The function button can be changed to match the current functionality by pushing 
the button out of the unit from below. The new button is then simply pressed into 
the unit. 
 The all delegates off button enables the user to turn off all active delegate 
microphones. 
 The mute button enables the user to temporarily mute the active microphone, while 
the mute button is held down. 
 The microphone button enables the user to activate/deactivate the microphone. 
The floor channel is distributed through the built-in loudspeaker except when the 
microphone is turned on. The user can also listen to the floor channel by insert-
ing headphones in the headphone jack and adjusting the volume with the volume 
buttons. 
 The gooseneck microphones GM 652x or GM 6622 can be locked to the unit with 
a 1.5 mm hex key. The lock is accessible from the small hole below the DIS logo 
on the side of the XLR socket. Turn the hex key counter clockwise to lock the 
gooseneck microphone to the unit and turn the hex key clockwise to unlock the 
gooseneck microphone from the unit. 
 The DC 6120 P can be combined with any conference units from the DCS 6000 
Digital Conference System. 

    Features 

  The DC 6120 P has the following standard features: 
•    Standard conference unit for chairmen and delegates 
•   Fully digital audio transmission 
•   Daisy chain topology with loop-through connections or star 

topology using junction boxes 

•   CAT 5e (or higher) F/UTP or U/FTP cabling 
•   Maximum 3800 conference units per system 
•   Support for four microphone operation modes; Automatic, 

FIFO, Manual and VOX (voice activation) 

•   Support for three microphone interrupt ability modes enabling 

'ping pong' mode 

•   Auto off of microphones 
•   Lockable XLR gooseneck microphone connector 
•   One high-quality loudspeaker 
•   One headphone connector with volume control supporting the 

floor channel 

•   One headphone jack 
•   Microphone and function (all delegates off/mute) buttons 
•   Exchangeable buttons for changing the button labels to other 

languages and other functionality 

DC 6120 P Conference Unit

Data sheet DS-DC6120 P-e

Reviews: