![background image](http://html1.mh-extra.com/html/shure/blx4r/blx4r_user-manual_1261760014.webp)
Shure Incorporated
14/24
Transmitter (lock/unlock)
Turn the transmitter on. Hold the group button, then press the channel button for approximately 2 seconds. The
LED indicator rapidly flashes red when locked.
Receiver (lock/unlock)
Turn the receiver on. Simultaneously hold the group and channel button until the flashing lock icon appears in the
lower left-hand corner of the display, indicating the controls are locked. Repeat to unlock the controls.
Power Off
Press and hold the power button to power off the BLX2 or BLX4R. To power off the BLX1, slide the power switch to
OFF.
Wearing the Bodypack Transmitter
Clip the transmitter to a belt or slide a guitar strap through the transmitter clip as shown.
For best results, the belt should be pressed against the base of the clip.
Removing and Installing Identification Caps
The BLX2 is equipped with a black identification cap from the factory (dual vocal systems ship with additional gray
cap).
To remove:
Remove battery cover. Squeeze sides and pull off cap.
To install:
Align the cap and click into place. Replace battery cover.
An Identification Cap Kit containing assorted colored caps is available as an optional accessory.