Shure Incorporated
7/8
Self Noise
equivalent SPL, A-weighted, typical
29.5
dB SPL-A
Common Mode Rejection
(20
Hz
to 200
kHz
)
≥55 dB
Frequency Contour Switch
7 dB of attenuation centered at 400 Hz
Power Requirements
11
–
52
V DC
phantom power , 5.4
mA
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight
470
g
(16.6
oz.
)
Connector
Three-pin professional audio (XLR), male, balanced
1 Pa=94 dB SPL 1 Pa=94 dB SPL 1 Pa=94 dB SPL 1 Pa=94 dB SPL 1 Pa=94 dB SPL
THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL THD of
microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL
THD of micro-
phone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL
THD of microphone pre-
amplifier when applied input signal level is equivalent to cartridge output at specified SPL THD of microphone preamplifier
when applied input signal level is equivalent to cartridge output at specified SPL
S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weighted
S/N ratio is the difference be-
tween 94 dB SPL and equivalent SPL of self-noise, A-weighted
S/N ratio is the difference between 94 dB SPL and equiva-
lent SPL of self-noise, A-weighted
S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weight-
ed S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weighted
All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with
slightly decreased headroom and sensitivity
All specifications measured with a 48 Vdc phantom power supply. The micro-
phone operates at lower voltages, but with slightly decreased headroom and sensitivity All specifications measured with a 48
Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity
All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with
slightly decreased headroom and sensitivity
All specifications measured with a 48 Vdc phantom power supply. The micro-
phone operates at lower voltages, but with slightly decreased headroom and sensitivity
[4]
[1]
[1]
[1]
[1]
[1]
[2]
[2]
[2]
[2]
[2]
[3]
[3]
[3]
[3]
[3]
[4]
[4]
[4]
[4]
[4]
