![background image](http://html.mh-extra.com/html/shure/beta-58/beta-58_user-manual_1261683007.webp)
7
ULX1
ULX2
ULX1, ULX2
ULXP4
ULXP4
ULX1, ULX2
ULX1, ULX2
ULX1
ULX2
ULX1
ULX2
Locking/Unlocking Frequency
ULX1
ULX2
Locking/Unlocking Frequency
00:00:04
Transmitter Gain
For best audio quality, adjust transmitter gain so only the green and yel-
low TX AUDIO LEDs flicker. (Occasional illumination of the red LED is
okay.)
Green=nominal
Yellow=peak
Red=overload
ULX1
1. Set the attenuator (pad) switch to 0 dB for microphones and –20 dB for
guitars. (Some low output instruments may not need attenuation.)
2. Adjust gain control as necessary.
ULX2
•
Fully clockwise for quiet to normal vocal performance.
•
Halfway counterclockwise for loud vocal performance.
•
Fully counterclockwise for horn or percussive instruments.
Audio Input Meter
PEAK Icon
This icon appears when the input signal
overloads the transmitter. The icon is dis-
played for 2 seconds after input overload
is detected.
Locking the Receiver (ULXP4 Only)
This feature prevents accidental setting changes.
Unlocking
Hold the SET button while turning the
control wheel left, right, left.
lock volume
lock frequency
Note:
If LEVEL flashes on the
LCD, decrease the LEVEL control
to continue.
Locking the Transmitter
Lock Frequency
Lock Power (On)
Summary of Contents for Beta 58
Page 51: ......