![background image](http://html1.mh-extra.com/html/shure/beta-53/beta-53_user-manual_1261674004.webp)
ENGLISH
4
USING THE BETA 53 IN HARDWIRED APPLICATIONS
An in-line preamplifier (Shure part no. RPM626) may be used with the Beta 53. This
device requires phantom power ranging from 11 to 52 Vdc.
USING THE BETA 53 WITH OTHER BODYPACK TRANSMITTERS
If connecting the microphone to anything OTHER than a Shure wireless bodypack,
make sure it provides a reg5 Vdc source (130
A
minimum) to the red con-
ductor, as shown in Figure 1.
CONDENSER
CARTRIDGE
IMPEDANCE
CONVERTER
G
SHIELD
BLK
RED
S
D+
+5 Vdc (130
A min.)
Audio Out
MICROPHONE WIRING DIAGRAM
FIGURE 1
USING THE BETA 53 WITH THE TINI Q-G
TA4F CONNECTOR
The following diagram shows how the Beta 53 is wired to the Tini Q-G TA4F connec-
tor.
CONDENSER
CARTRIDGE
IMPEDANCE
CONVERTER
SHIELD
BLK
RED
+5 Vdc
Audio Out
G
D
S
1
3
4
2
TA4F (solder side view)
TINI Q-G TA4F CONNECTOR WIRING DIAGRAM
FIGURE 2