3
<Link status>
000.000 MHz
}
|
00.00
2
3
4
6
5
1
6
7
Remove the battery
Unscrew the
locking ring
Batteries
Axient transmitters are powered by a Shure lithium-ion rechargeable
battery.
Caution:
Turn off the transmitter before changing batteries.
Note:
Refer to your battery charger manual for charging instructions.
Battery Runtime Chart
Battery runtime varies according to the transmitter’s operating mode.
Higher power settings will reduce battery runtime.
Remaining battery runtime is shown on the display in the form of a bat-
tery indicator icon and approximate time in hours and minutes.
Battery Indicator Approximate
Time Remaining
Tips for achieving maximum runtime:
• Use fully charged batteries
• Use the lowest power setting if possible
• Turn off the transmitter when not in use
1
1
Main Menu Screen
The main menu screen displays the following transmitter parameters:
① Link Status
•
Linked
: Displays linked receiver ID
•
Unlinked
: Not linked to a receiver
② Frequency
Tuned frequency of the transmitter
③ Battery Charge Indicator
5-segment icon indicates battery life
④ Remaining Battery Life
Displays remaining battery life in hours and minutes
⑤ Showlink Icon
Indicates transmitter is within range of a ShowLink access point
enabling remote control of parameters
⑥ Audio Meter
Indicates the audio signal level
⑦ Control Lock Icon
Displayed when buttons are locked
Locking the Buttons
Lock the buttons of the transmitter to prevent accidental or unauthor-
ized parameter changes.
Press and hold the ▼ and ▲ buttons for 3 seconds. Repeat to unlock.
Power-on RF Mute
The transmitter can be powered on in RF mute mode to prevent trans-
mission of the audio signal.
Press and hold the ▼ button during power until the
RF Muted
message
is displayed.
Draft
6/7/11
