background image

Shure Incorporated

8/26

Battery runtime in hours and minutes or bar display

Key: Displayed when encryption is enabled

Lock: Displayed when controls are locked. Icon will flash if 

access is attempted to a locked control (power or menu).

ShowLink signal strength displays 0 to 5 bars

STD: Standard Transmission Mode

HD: High Density Transmission Mode

RF Mute Engaged: Displayed when RF output is muted

Shure Rechargeable Batteries

Shure lithium-ion batteries offer a rechargeable option for powering the transmitters. Batteries quickly charge to 50% capacity 

in one hour and reach full charge within three hours.

Single chargers and multiple bay chargers are available to recharge the Shure batteries.

Caution: 

Only charge Shure rechargeable batteries with a Shure battery charger.

Checking Battery Info

When using a Shure rechargeable battery, the receiver and transmitter home screens display the number of hours and minutes 

remaining.

Detailed information for the battery is displayed 

Battery

 menu of the transmitter: 

Utilities

 > 

Battery

Battery:

 The chemistry type of for the installed battery (Shure, Alkaline, Lithium, NiMH)

Bars:

 Indicates the number of bars displayed

Time:

 Battery runtime

Charge:

 Percentage of charge capacity

Health:

 Percentage of current battery health

Cycle Count:

 Total of the number of charging cycles for the installed battery

Temperature:

 Battery temperature reported in Celsius and Fahrenheit

Summary of Contents for Axient Digital ADX1



























Reviews: