Shure Incorporated
12/26
◦
◦
◦
◦
Audio Menu
Pad
Adjust the pad to avoid overloading the audio input. Select
-12 dB
or
Off
.
Offset
Adjust
Offset
level to balance mic levels when using two transmitters or when assigning multiple transmitters to receiver
slots. Adjustment range: -12 dB to +21 dB.
Polarity
Selectable polarity assignment for the audio input connector:
Pos:
Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and
the tip of the TRS output.
Neg:
Positive pressure on microphone diaphragm produces negative voltage on pin 2 (with respect to pin 3 of
XLR output) and the tip of the TRS output.
Mute
When enabled, the power switch is configured as a mute switch for the audio:
Power switch on: Audio signal on
Power switch off: Audio signal muted
Exit mute mode to return the power switch to its normal functionality.
Tone Gen
Transmitter will generate a continuous test tone:
Freq
: The tone can be set to 400 Hz or 1000 Hz.
Level
: Adjusts the output level of the test tone.
Utilities Menu
Device ID
Assign a device ID of up to 9 letters or numbers.
Locks
Locks the transmitter controls and power switch.
None:
The controls are unlocked
Power:
The power switch is locked
Menu:
The menu parameters are locked
All:
The power switch and menu parameters are locked
Link Info
Displays the following information about the link between a transmitter and receiver:
Not Linked
: The transmitter is not linked to a receiver