background image

AuxPander 

Auxiliary Expander

User Guide

! IMPORTANT SAFETY INSTRUCTIONS !

 1.

READ these instructions.

 2.

KEEP these instructions.

 3.

HEED all warnings.

 4.

FOLLOW all instructions.

 5.

DO NOT use this apparatus near water.

 6.

CLEAN ONLY with dry cloth.

 7.

DO NOT block any ventilation openings. Install in accordance with
the manufacturer’s instructions.

 8.

Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce
heat.

 9.

DO NOT defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wider blade or the third prong are provided for your safe-
ty. If the provided plug does not fit into your outlet, consult an electri-
cian for replacement of the obsolete outlet.

 10. PROTECT the power cord from being walked on or pinched, particu-

larly at plugs, convenience receptacles, and the point where they exit
from the apparatus.

 11. ONLY USE attachments/accessories specified by the manufacturer.

 12.

USE only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the appa-
ratus. When a cart is used, use caution when mov-
ing the cart/apparatus combination to avoid injury
from tip-over.

 13. UNPLUG this apparatus during lightning storms or when unused for

long periods of time.

 14. REFER all servicing to qualified service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been ex-
posed to rain or moisture, does not operate normally, or has been
dropped.

This symbol indicates that there are important operating
and maintenance instructions in the literature
accompanying this unit.

This symbol indicates that dangerous voltage constituting
a risk of electric shock is present within this unit.

WARNING:

 

Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel.

The safety certifications do not apply when the operating voltage is changed from the factory setting.

27A8778 (BF)

2001, Shure Incorporated

Printed in Italy

Summary of Contents for AuxPander





















Reviews: