![background image](http://html.mh-extra.com/html/shure/ani4out-block/ani4out-block_manual_1261016007.webp)
Connections and Signal Flow
sig/clip
power
reset
PoE
network
network audio
encryption
1
1
2
2
3
4
3
4
OUTPUT
Dante audio devices
Network Switch
Audio Processor
Output to server (VOIP or telephone)
Input: Dante™ Digital Audio
A single network cable delivers 4 channels of audio and Power over Ethernet (PoE). Use Dante™ Controller to route audio channels from the network to the
network interface
.
Output: Analog (4 XLR or Block Connectors)
Each output sends a discrete audio channel to connect to an analog device.
Setting up the Audio Network
Shure
networked conferencing systems
are comprised of
Microflex Advance
microphones and
network interfaces
, which operate entirely on a Dante™ network.
Additional hardware, including network switches, computers, loudspeakers, and audio processors are described in the hardware component index.
Shure components
shown in this diagram:
Microflex Advance
Microphones
The MXA910 and MXA310 are equipped with Dante outputs, and connect directly to a network switch.
Audio Network Interfaces
The interfaces are used to connect analog devices such as loudspeakers and analog microphones to the network.
ANI4IN:
Converts 4 analog signals (separate XLR and block connector models available) into Dante™ digital audio signals.
ANI4OUT:
Converts 4 channels of Dante™ audio from the network into analog signals.
Shure Incorporated
Microflex Advance ANI4OUT
Microflex Advance ANI4OUT
7/21
2016/08/24