![background image](http://html.mh-extra.com/html/shure/ani4out-block/ani4out-block_manual_1261016016.webp)
The ANI4OUT will respond with one of these
strings.
ANI4OUT Response:
< REP x AUDIO_OUT_LVL_SWITCH LINE_LVL >
< REP x AUDIO_OUT_LVL_SWITCH AUX_LVL >
< REP x AUDIO_OUT_LVL_SWITCH MIC_LVL >
Set Analog Gain
Where x is ASCII channel number: 0 through 4.
Send one of these commands to the ANI4OUT.
Command String:
< SET x AUDIO_OUT_LVL_SWITCH LINE_LVL >
< SET x AUDIO_OUT_LVL_SWITCH AUX_LVL >
< SET x AUDIO_OUT_LVL_SWITCH MIC_LVL >
The ANI4OUT will respond with one of these
strings.
ANI4OUT Response:
< REP x AUDIO_OUT_LVL_SWITCH LINE_LVL >
< REP x AUDIO_OUT_LVL_SWITCH AUX_LVL >
< REP x AUDIO_OUT_LVL_SWITCH MIC_LVL >
Get Sig/Clip LED
Where x is ASCII channel number: 0 through 4. It
is not necessary to continually send this command.
The ANI4OUT will send a REPORT message
whenever the status changes.
Command String:
< GET x LED_COLOR_SIG_CLIP >
The ANI4OUT will respond with one of these
strings. This matches the sig/clip LEDs on the front
of the ANI4OUT.
ANI4OUT Response:
< REP x LED_COLOR_SIGL_CLIP OFF >
< REP x LED_COLOR_SIG_CLIP GREEN >
< REP x LED_COLOR_SIG_CLIP AMBER >
< REP x LED_COLOR_SIG_CLIP RED >
Flash Lights on ANI4OUT
Send one of these commands to the ANI4OUT.
The flash automatically turns off after 30 seconds.
Command String:
< SET FLASH ON >
< SET FLASH OFF >
The ANI4OUT will respond with one of these
strings.
ANI4OUT Response:
< REP FLASH ON >
< REP FLASH OFF >
Turn Metering On
Where sssss is the metering speed in milliseconds.
Setting sssss=0 turns metering off. Minimum setting
is 100 milliseconds. Metering is off by default.
Command String:
< SET METER_RATE sssss >
Where aaa, bbb, etc is the value of the audio level
received and is 000-060.
aaa = output 1
bbb = output 2
ccc = output 3
ddd = output 4
ANI4OUT Response:
< REP METER_RATE sssss >
< SAMPLE aaa bbb ccc ddd >
Stop Metering
A value of 00000 is also acceptable.
Command String:
< SET METER_RATE 0 >
ANI4OUT Response:
< REP METER_RATE 00000 >
Get LED Brightness
Command String:
< GET LED_BRIGHTNESS >
Shure Incorporated
Microflex Advance ANI4OUT
Microflex Advance ANI4OUT
2016/08/24
16/21