Shure Incorporated
36/55
◦
◦
◦
◦
Low-cut Filter
The low-cut filter rolls off low frequencies to reduce unwanted noise from sources such as table vibrations, HVAC systems, and
other environmental noise.
To enable, open the web application and select the low-cut filter button in the device options section.
Mute Buttons
The microphone has 4 touch-sensitive mute buttons around the edge of the microphone. Pressing any button mutes the entire
device. You can mute channels individually using Shure Designer software or the web application. If the Light Ring
is set to dis-
play Segments, the individual channel mutes are visible on the device. If it is set to Ring, the Light Ring
only displays the de-
vice mute status.
To adjust button properties in Designer, go to
Settings
>
Logic
control
.
To adjust button properties in the web application, go to
Configuration
>
Button
Control
.
Mute Control Function
Local:
mutes/unmutes audio from the microphone
Logic out:
sends a command string to a control system to mute the audio farther down the signal path
Disabled:
button is inactive
Mute Control Mode
Toggle on/off:
Press the button to switch between mute and active states
