Shure Incorporated
31/55
1.
2.
3.
•
•
•
•
If you’re using Shure Designer software to configure your system, please check the Designer help section for more about this topic.
Identifying Channels
Identify a channel on the microphone by flashing the corresponding LED. This quickly verifies that level or equalizer adjust-
ments are being made to the intended channel.
Select Configuration > Coverage
Select a channel
Use the Identify Channel button to flash the LEDs on the microphone
Device Identification
To identify the microphone by flashing the light ring, select the Identify button in the device options section.
LED Light Ring
Light ring properties are configurable to match room or enterprise-wide behavior conventions and aesthetics.
Brightness
Adjusts the intensity level of the LED light ring
Lighting Style
Segments
are divided to show individual channels.
Ring
is a continuous LED
Display Automix Gating
Indicates a channel is off (audio signal has dropped below the gate threshold). When en-
abled, the lighting style automatically switches to segment mode.
Off:
LED light ring turns off when a channel gates off
Follow mute color:
LED light ring switches to assigned mute color when a channel gates off
Unmute Behavior
LED activity when the microphone is active
Unmute Color
LED color when the microphone is active
Mute Behavior
LED activity when the microphone is muted
Mute Color
LED color when the microphone is muted
Parametric Equalizer (PEQ)
Maximize audio quality by adjusting the frequency response with the parametric equalizer.
Common equalizer applications:
Improve speech intelligibility
Reduce noise from HVAC systems or video projectors
Reduce room irregularities
Adjust frequency response for reinforcement systems
To turn off all EQ filters, select Bypass all EQ.
If you’re using Shure Designer software to configure your system, please check the Designer help section for more about this topic.