Shure Incorporated
17/55
1.
2.
3.
4.
1.
Microphone Status
LED Behavior / Color
Mute
Red (solid)
Hardware identification
Green (flashing)
Device identify:
Entire light ring
Channel identify:
Light ring segment
Firmware update in progress
Green (ring fills up, turns off, repeats)
Reset
Network reset:
Red (rotates around ring)
Factory reset:
Blue (rotates around ring)
Error
Red (split, alternate flashing)
Device power-up
Blue (rotates around ring)
Installing the Cable-Exit Plug
The plug covers the cable exit for permanent installations in which the cable is routed down through a table.
Remove the screw that holds in the cable-retaining tab closest to the cable exit
Remove the cable-retaining tab
Insert the plug
Replace the screw to secure the plug
Permanent Table Installation
Remove the 3 screws located in the center on the bottom of the microphone