Shure Incorporated
13/55
◦
④
Connection to far end
Connect the output from the audio processor to a VOIP server or telephone line to deliver audio between the near end and
far end.
⑤
Audio from far end to amplifier
Route the far end audio through the audio processor output to an amplifier.
⑥
Amplified audio signal to loudspeakers
Connect the loudspeakers to the amplifier to deliver the audio from the far end
Web Conferencing Software with Dante Virtual Soundcard
①
Microphone to network switch
Connect the microphone output with a network cable to any port on the switch that supplies Power over Ethernet (PoE).
②
Computer to network switch
Connect a computer to the network switch to provide control of the microphone and other networked components through
the software control panel. The computer also runs Dante Virtual Soundcard, Dante Controller, and the web conferencing
software.
Dante Virtual Soundcard / Controller:
Turn on the Dante Virtual Soundcard and use Dante Controller to route the micro-
phone signal to the computer.
