contents
1. Let’s get funky
(turning on your shoX duke + button control)
2. Blinky light thingy
(a guide to the colourful blinky light thingy)
3. Hook a brother up
(pairing different devices)
4. Get wired
(using the 3.5mm aux cable)
5. Play your tunes direct from your device
(using the USB port)
6. Power Up
(charging your shoX duke)
2. blinky light thingy
(a guide to the colourful blinky light thingy)
It’s time to get to know these colourful lights a bit better,
wouldn’t you say?
• Is rapidly flashing blue – you’re ready to pair with a
flawless Bluetooth connection
• Is slowly flashing blue – you have successfully paired
your device to the shoX duke or you’ve paused a track
whilst in Bluetooth mode
• Is glowing solid blue – you’re enjoy the sweet sound of
shoX duke in Bluetooth mode
• Is green (aux cable connected) you’re in “get wired”
mode or you’ve plugged in your USB. In USB mode,
the green blinky light thingy will glow a solid green
when you’ve paused a track
• Is red – you’re in “power up” mode (charging your shoX
retro)
3. hook a brother up
(pairing different devices)
First of all, make sure your blinky light thingy is rapidly
flshing blue – now you’re in Bluetooth pairing mode.
Make sure your device and your shoX duke are within 1
metre of each other.
iPhones & iPads
• go to general -> Bluetooth & gracefully swipe it to the
“ON” position
• shoX duke will become discoverable, touch to connect
• now is the blinky light thingy glowing a solid blue? I
knew you could do it!
Other cellphones & tablets
• turn your Bluetooth on and search for “shoX duke”
• if you’re prompted for a password, enter “0000”
• check your Bluetooth device list & connect with your
shoX duke
1. so you wanna get funky do ya?
(turning on your shoX duke + button control)
Right now, it’s time to bring this ol’ boy to life! Don’t worry,
we’re going to do this together. See that analogue dial on
the top of your shoX duke, to the far left? This lil guy is
going to be your control centre for using your shoX duke.
To turn your shoX duke on, simply turn the dial clockwise
to select “BT” for Bluetooth mode. You should see a blue
light flashing next to the Bluetooth icon. Sweet success!
Now remember this dial, you’re going to need it when you
want to choose between Bluetooth, Aux in and USB
mode.
Now let’s get to know these nifty track control buttons:
Play or pause your beats in USB or Bluetooth mode/ Hold
down to disconnect Bluetooth connection in “Bluetooth”
mode
Skip to the next track
Return to the previous track
When you want to put your fav song on repeat (only in
USB mode)
(flip the page over
to continue...)
pure Bluetooth bliss
Brought to you by:
www.tevo.co.za | [email protected]
0861 77 88 88
