SHOWTEC Wipe Out 360 RGBW, User Manual

Page: 17 / 32

16
Ordercode: 42562
Wipe Out 360 RGBW
 Cyan
 Yellow
 White
 Blue
 Green
 Red
 Black (Blackout)
15)
Press the MODE button to return to step 12 and press the UP and DOWN buttons until the display
shows .
16) Press the SETUP button to enter the menu.
17) Press the UP and DOWN buttons to adjust the strobe frequency. The adjustment range is between
.
18) Press the MODE button to return to step 2, press the UP and DOWN buttons until the display shows
.
19) Press the SETUP button to enter the menu.
20) Press the UP and DOWN buttons to toggle between the following colors:
 Red
 Green
 Blue
 White
 Frequency
21)
If the display shows Red, Green, Blue or White, press the SETUP button to proceed to the LED intensity
adjustment:
22)
Press the UP and DOWN buttons to adjust the intensity. The adjustment range for each color is
between 0-255, from dark to brightest.
23) When the display shows , press the SETUP button to enter the strobe settings.
24) Press the UP and DOWN buttons to adjust the strobe intensity. The adjustment range is between
1.2 Manual Mode - Pan
01) Repeatedly press the MODE button until the display shows .
02) Press the UP and DOWN buttons until the display shows .
03) Press the SETUP button to enter Pan adjustment.
04) Press the UP and DOWN buttons to toggle between the 4 options:
 p-Auto
 p-Manul
 p-CCW
 p-CW
05)
When the display shows , press the SETUP button to enter. In this mode, it is not possible to
adjust the pan parameters.
06) When the display shows , press the SETUP button to enter.
07) Press the UP and DOWN buttons to manually adjust pan movement. The adjustment range is
between .
08) When the display shows , press the SETUP button to enter the menu.
09) Press the UP and DOWN buttons to manually adjust the speed of counterclockwise pan movement.
The adjustment range is between , from slow to fast.