SHOWTEC Wipe Out 360 RGBW, User Manual

Page: 16 / 32

15
Ordercode: 42562
Wipe Out 360 RGBW
Main Menu Options
Manual Mode
Auto Mode
Sound-controlled Mode
DMX-512 Mode
Master/Slave Mode
Settings
1. Manual Mode
01) While in the main menu, press the MODE button until the display shows .
02) Press the SETUP button to enter the menu.
03) Press the UP and DOWN buttons to toggle between the 3 options:
 1.1 LED
 1.2 Pan
 1.3 Tilt
1.1 Manual Mode - LED
01) When the display shows , press the SETUP button to enter the LED adjustment menu.
02) Press the UP and DOWN buttons to toggle between the 3 adjustable options:
 Auto
 Color
 Dimmer
03)
When the display shows , press the SETUP button to enter the menu.
04) Press the UP and DOWN buttons to toggle between the 2 adjustable options:
 Speed
 Frequency
05)
When the display shows , press the SETUP button to enter the menu.
06) You can now adjust the speed of your light show. The adjustment range is between
, from slow to fast.
07) When the display shows , press the SETUP button to enter the menu.
08) You can now adjust the strobe frequency. The adjustment range is between .
09) The device will now run a manual show, with the previously adjusted characteristics.
10) Press the MODE button to return to step 2 and press the UP and DOWN buttons until the display shows
.
11) Press the SETUP button to enter the menu.
12) Press the UP and DOWN buttons to toggle between the 2 adjustable options:
 Static
 Frequency
13)
When the display shows , press the SETUP button.
14) Press the UP and DOWN buttons to adjust the LED colors. You can choose from the following options:
 All on
 Light blue
 Light green
 Light red
 Purple