11
Ordercode: 42278
White-PIX
Multiple PIX devices (DMX Control)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02)
Always use a safety cable (ordercode 70140 / 70141).
03)
Use a 3-pin XLR cable to connect the PIX and other devices.
04)
Link the units as shown in fig. 05. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX signal cable. Repeat this process to link the second, third, and fourth units.
05)
Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first
unit. Do not supply power before the whole system is set up and connected properly.
Multiple PIX devices DMX Set Up
Fig. 05
Note : Link all cables before connecting electric power
Summary of Contents for White-PIX V1
Page 26: ...25 Ordercode 42278 White PIX Dimensions ...
Page 27: ...26 Ordercode 42278 White PIX Notes ...
Page 28: ... 2015 Showtec ...
