20
TR-512 Install
Product code: 50826
Control Panel
A)
OLED display
B)
MENU button
C)
UP button
D)
ENTER button
E)
DOWN button
Fig. 18
●
Use the MENU button to open the main menu, to exit the current submenu and to return to the main
menu.
●
Use the UP/DOWN buttons to navigate through the menus and to scroll through the available
characters/numbers.
●
Use the ENTER button to open the desired menu, to confirm your choice or to set the currently
selected character/number.
Recording a Program
The device allows to record DMX programs and assign them to the 6 available triggers.
01)
Connect a DMX-512 light controller and light fixtures to the device. See 5.3.1. Program Recording
Setup on page 14 for more information.
02)
Make sure that the included microSD card is inserted into the device.
03)
Record a program. See 6.9.2. Record Show on page 24 for more information. During recording, the
LED indicator (11) will be blinking. See 6.7. LED Statuses on page 21 for more information.
04)
When you finished recording the program, disconnect the DMX-512 light controller.
Playing a Program
The device is equipped with 6 triggers to which you can assign your recorded programs. When a trigger is
activated, the program assigned to this trigger will be played.
01)
Connect the external triggers to the device. See 5.3.2. Program Playing Setup on page 15 for more
information.
02)
Assign the recorded program to one of the 6 triggers. See 6.9.4. Trigger Event on page 26 for more
information.
03)
Activate the external triggers or press the buttons on the TR-512 Install-Wall Panel. The LED indicator
(10) will blink once every time a trigger is activated. During playing programs, the LED indicator (11)
will be on. See 6.7. LED Statuses on page 21 for more information.
