19
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
3. Built-in Programs
In this menu you can run the built-in programs.
In order to be able to operate the Star Dream in this mode, disconnect the DMX cable from
the DMX input (03).
If you do not remove the cable, the light output will be blacked out.
01)
While in the main menu, press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu. The display will show:
03)
Press the UP/DOWN buttons to select one of the 10 built-in programs and the auto macro.
04)
Press the ENTER button to edit the program.
05)
Press the UP/DOWN buttons to set the program brightness. The adjustment range is between 0–255,
from dark to brightest.
06)
Press the ENTER button again, to save changes and to proceed to program speed settings.
07)
Press the UP/DOWN buttons to set the program speed. The adjustment range is between 0–100, from
slow to fast.
08)
Press the ENTER button to save changes.
