SHOWTEC Performer 2000 Fresnel DDT MKII V2, Manual

Page: 7 / 32

6
Ordercode: 33037
Performer 2000 Fresnel DDT MKII
Procedure:
● If the device is lowered from the ceiling or high joists, professional trussing systems have to be used.
● Use a clamp to mount the device, with the mounting bracket, to the trussing system.
● The device must never be fixed swinging freely in the room.
● The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
● When rigging, derigging or servicing the device, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
The device can be mounted to any kind of truss with a clamp.
Connection with the mains
Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International EU Cable UK Cable US Cable Pin
L
BROWN RED YELLOW/COPPER PHASE
N
BLUE BLACK SILVER NEUTRAL
YELLOW/GREEN GREEN GREEN PROTECTIVE
GROUND
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!