SHOWTEC Performer 2000 Fresnel DDT MKII V2, Manual

Page: 21 / 32

20
Ordercode: 33037
Performer 2000 Fresnel DDT MKII
6. Setting
In this menu you can adjust the device’s special settings.
01)
While in main menu, press the UP/DOWN buttons until the display shows SETTING.
02) Press the ENTER button to open the menu.
03) The display will show PASS CODE and you will need to insert a key combination which will unlock this
hidden menu. To do so, press the buttons in the following order: UP, DOWN, UP, DOWN, ENTER.
04) Press the UP/DOWN buttons to toggle through the following options:
KEY Safety key
DIMMER Dimmer speed
CURVE Dimming curve settings
PERFORM Performance settings
SLOCK Settings menu safety lock
PERSONALITY DMX channel modes
DMX ERROR Save DMX/Blackout
RESET Reset settings
MODE SETTING DMX data transfer
PWM RATE Refresh rate
6.1. Safety Key
01)
When the display shows KEY, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle between ON and OFF to activate/deactivate the safety lock.
03) When the option is active, you will need to insert the safety key combination every time the display
turns off.
04) When the option is inactive, the Settings menu will not get locked, providing that the device remains
in it.
05) If the display shows SETTING and turns off after 30 seconds – you will need to re-insert the safety key.
6.2. Dimmer Speed
01)
When the display shows DIMMER, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle through the 5 options:
OFF Dimmer Speed OFF
DIM1-DIM 4 Dimmer speed, from fast to slow
6.3. Dimming Curve Settings
01)
When the display shows CURVE, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to choose the desired dimming curve out of the 4 available options: