15
Ordercode: 42407
LED Pinspot Q4
4. Sound-controlled Mode
With this menu, you can set the device’s sound sensitivity.
01)
Press the MODE button until the display shows
.
02)
Press the SETUP button to open the menu.
03)
Press the UP/DOWN buttons to set the desired sound sensitivity. The adjustment range is between
, from low to high sound sensitivity.
04)
The device will now react to the beat of the background music.
5. DMX-512 Mode
With this menu, you can set the DMX address and select the desired channel mode.
01)
Press the MODE button until the display shows
.
02)
Press the SETUP button to open the menu.
03)
Press the UP/DOWN buttons to choose the desired DMX address. The adjustment range is between
.
04)
Press the SETUP button to open the submenu.
05)
Press the UP/DOWN buttons to choose one of the 3 channel modes:
4-channel mode
6-channel mode
8-channel mode
06)
Press the SETUP button to confirm.
6. Master/Slave Mode
With this menu, you can set the device as a slave.
01)
Press the MODE button until the display shows
.
02)
The device will now react the same as the master device.
7. Settings
With this menu you can adjust the device’s settings.
01)
Press the MODE button until the display shows
.
02)
Press the SETUP button to open the menu.
03)
Press the UP/DOWN buttons to choose one of the 4 submenus:
Dimming curves
Reset
DMX fail
DMX synchronization
04)
Press the SETUP button to open the desired menu.
