9
Ordercode: 40120
Followspot LED 120W
Backside
Fig. 03
08)
OPEN button
09)
6500K button
10)
5400K button
11)
4500K button
12)
2800K button
13)
RAINBOW button
14)
Dimmer fader
15)
Iris fader
16)
Strobe fader
Installation
Remove all packing materials from the Followspot LED 120W. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
