14
Ordercode: 42197
LED Lightbar 12 Pixel
04)
Press
Setup
again and you can set the strobe value by using the
Up
and
Down
buttons.
05)
Press the
Mode
button to go back to
.
06)
With the
Up
and
Down
buttons you can choose between
.
07)
Press the
Setup
button to set the speed or strobe value.
08)
Use the
Up
and
Down
buttons to set the speed and strobe value between 0-99 or
SPFL
.
Auto Run Program
With this menu you can set the Auto run mode of the LED Lightbar 12 Pixel.
01)
Press the
Mode
button on the device, until the display shows
.
02)
The LED Lightbar will start automatically with its built-in program.
03)
Press the
Setup
button to enter the submenu.
04)
With
you can set the frequency of each step of the Auto program.
05)
With
you can set the speed of the Auto program.
06)
With
you can set the frequency of the strobe of the Auto program.
07)
You can scroll through these options with the
Setup
button.
08)
With the
Up
and
Down
buttons you can adjust the options.
DMX Mode
With this menu you can set the DMX address and choose a DMX configuration.
01)
Press the
Mode
button, until the display shows
.
02)
You can choose 512 different DMX addresses.
03)
Use the
Up
and
Down
buttons to select the required address between
.
04)
You can also press the
Setup
button to choose a different DMX Mode
.
4 Channels
4 Channels
6 Channels
12 Channels
10 Channels
18 Channels
48 Channels
