6
Order code: 50703
ColorCue 1
Back View
Fig. 02
L)
USB connector (no function)
M)
Microphone
N)
3-pin DMX connector OUT
O)
DC input connector
P)
Power switch ON/OFF
Installation
Remove all packing materials from the ColorCue 1. Check if all foam and plastic padding is removed.
Connect the LED controller to a power outlet with the supplied AC power adapter.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Setup and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage.
Power on
Press the power switch (P) in ON position to turn the ColorCue 1 on.
Press the power switch (P) in OFF position to turn the ColorCue 1 off.
Summary of Contents for ColorCue 1
Page 16: ...2019 Showtec...
