11
Order code: 50703
ColorCue 1
●
Sound-controlled playback: The LED on the button will light up in blue. The chase will play
automatically reacting to the beat of the music. Turn the SOUND control (G) to adjust the sensitivity
of the built-in microphone.
You can additionally adjust the following parameters during playback of the chase:
●
Chase direction: turn the < > control (D) to change the direction of the chase. In OFF position (<) the
chase will be played backwards. In FULL position (>) the chase will be played forwards.
●
Speed: turn the SPEED control (E) to increase or decrease the speed of the chase.
●
Fade: turn the FADE control (F) to increase or decrease the fade time between the steps. Fade time
cannot be adjusted during manual playback and sound-controlled playback.
●
Strobe: turn the STROBE control (H) to add strobe effect to the chase. The adjustment range is from
OFF to FULL, from low to high frequency.
Cancel a Selection
To cancel a selection in Static Colors Mode and Chases Mode:
●
Press the same COLORS/CHASES button (01) – (12) again. The LED on the button will turn off.
●
Press another COLORS/CHASES button (01) – (12), to select a new color/chase. This will cancel the
current selection and activate the new one. The LED on the selected button will light up.
Programming Mode
In this mode you can create a custom color or a chase and assign it to one of the 12 COLORS/CHASES
buttons (A). The stored user colors/chases can be played in User Color Mode and User Chase Mode. See
pages 9-10 for more information.
Record a Color
01)
Press and hold down the RECORD button (21) for 3 seconds to enter programming mode. The LED on
the button will start blinking.
02)
Press the MANUAL button (24) to enter manual mode. The LED on the button will light up.
03)
Turn the controls (D) – (I) to select the desired color. The available colors are Red, Green, Blue, White,
Amber and UV. Turning the control clockwise will increase the color intensity.
04)
Press the USER COLORS button (14). The LED on the button will light up.
05)
Press the RECORD button (21) and one of the COLORS buttons (01) – (12) simultaneously to save the
color and assign it to a button. The LED on the selected COLORS button (01) – (12) will blink 3 times.
Note: To check if a COLORS button (01) – (12) is free and has no color assigned to, press the respective
button. If the LED on the button lights up, the button is not free.
06)
Press and hold down the RECORD button (21) for 3 seconds to exit programming mode. The LED on
the button will turn off.
Delete a Color
01)
Press and hold down the RECORD button (21) for 3 seconds to enter programming mode. The LED on
the button will start blinking.
02)
Press the USER COLORS button (14). The LED on the button will light up.
03)
Press the DELETE button (22) and the COLORS buttons (01) – (12) simultaneously to delete the color.
The LED on the COLORS button (01) – (12) will blink 3 times.
04)
Press and hold down the RECORD button (21) for 3 seconds to exit programming mode. The LED on
the button will turn off.
Record a Chase Step
01)
Press and hold down the RECORD button (21) for 3 seconds to enter programming mode. The LED on
the button will start blinking.
02)
Press the USER CHASES button (16) to enter User Chases Mode. The LED on the button will light up.
03)
Press one of the CHASES buttons (01) – (12) to which you want to assign the chase. The LED on the
button will light up.
Note: To check if a CHASES button (01) – (12) is free and has no chase assigned to, press the respective
button. If the LED on the button lights up, the button is not free.
Summary of Contents for ColorCue 1
Page 16: ...2019 Showtec...
