19
Order code: 34040
ACT Flood 80 RGBW
3. Fixture Settings
In this menu you can adjust the fixture settings.
01)
Press the UP/DOWN buttons to scroll through the following options:
02)
Press the ENTER button to confirm your choice.
3.1 Dimmer Curve
In this pop-up submenu you can set the dimmer curve.
01)
Press the ENTER button to open the pop-up submenu for the dimmer curve settings.
02)
Press the UP/DOWN buttons to toggle between Linear, Square Law, Inverse Square Law and S-Curve
●
Dimmer Speed:
There are 2 options available: LED (instant dimming without delay) and
Halogen (delayed dimming, imitating the behavior of a halogen lamp)
01)
Press the ENTER button to confirm your choice.
3.2 Dimmer Speed
In this pop-up submenu you can set dimmer speed of the device.
01)
Press the ENTER button to open the pop-up submenu for the dimmer speed settings.
02)
Press the UP/DOWN buttons to select one of the following 2 options:
●
LED:
Lamp dims immediately
●
Halogen:
Lamp dims 0,5 seconds slower, like a normal halogen lamp
03)
Press the ENTER button to confirm your choice.
