35
Galactic TXT
Product code: 51342
Press the UP/DOWN ARROW keys to select one of the parameters. There are 5 options available:
Set mirror, see 6.7.8.1. Set Mirror for more information
Set size, see 6.7.8.2. Set Size for more information
Master device. Select ON/OFF to enable/disable the device as a
master device in master/slave control mode
IR remote control. Select ON/OFF to enable/disable control with the
IR remote control
Reset to factory default settings
03)
Press the NEXT key to confirm the selection and open the respective submenu.
04)
Press the UP/DOWN ARROW keys to scroll through the available settings.
05)
Press the ENTER key to set the parameter.
Set Mirror
In this submenu you can flip the projection in 4 directions.
Press the UP/DOWN ARROW keys to select one of the following options:
Horizontal and vertical mirror effect
Vertical mirror effect
Horizontal mirror effect
Normal view
Press the ENTER key to set the parameter.
Set Size
In this submenu you can adjust the width and the height of the projection (zoom in/out).
Press the UP/DOWN ARROW keys to adjust the width (X axis). The adjustment range is 01–16.
Press the NEXT key to set the value and to enable the adjustment of the height.
Press the UP/DOWN ARROW keys to adjust the height (Y axis). The adjustment range is 01–16.
Press the ENTER key to set the value.
