18
51329
Galactic RGB850
Main Menu Options
Auto/Sound Programs
SD programs
DMX Address
Slave mode
Settings
1. Auto/Sound Programs
In this menu you can start several Auto or Sound-controlled programs.
01)
Press the FUNC button until the display shows
.
02)
Press the UP/DOWN buttons to choose between 4 options:
Auto program fast, suited for disco applications
Auto program slow, suited for lounge applications
Sound-controlled program fast, suited for disco applications
Sound-controlled program slow, suited for lounge applications
03)
Choose the desired built-in program and press the ENTER button to confirm.
04)
The Galactic will immediately start the desired Auto or Sound-controlled program.
Note: If there is no sound signal for 3 seconds the laser will turn off.
The software will now run a pre-programmed laser show.
The speed and the characteristics of the show cannot be modified in this mode.
2. Auto/Sound Patterns
In this menu you can start the built-in programs stored on the SD-card.
01)
Press the FUNC button until the display shows
.
02)
Press the UP/DOWN buttons scroll through the entire menu:
