25
LED SPI-2 Install
Product code: 50412
Automatic Programs
In this menu you can set the desired auto program.
If you have chosen Automatic, the display will show:
Press the UP/DOWN buttons to select one of the 2 submenus:
●
Program
●
Speed
Press the ENTER button to enter the desired menu.
If you have chosen PROGRAM, press the UP/DOWN buttons to choose one of the 42 built-in
programs. Press the ENTER button to confirm your setting.
If you have chosen SPEED, press the UP/DOWN buttons to set the built-in program’s speed. The
adjustment range is 1–100, from slow to fast. Press the ENTER button to confirm your setting.
Output Protocol
In this menu you can choose the desired Output Protocol.
While in the main menu, press the UP/DOWN buttons to choose Port Setup.
Press the ENTER button to enter the menu. The display will show:
Press the UP/DOWN buttons to select one of the 4 Output Protocols:
●
WS2811/WS2812B
●
PSK6812
●
P943
●
UCS9812
Press the ENTER button to confirm your desired protocol.
