26
Ordercode: 50405
RDM Commander
Maintenance
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The electric power supply cables must not show any damages or material fatigue.
The RDM Commander requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Wipe the display clean with glass cleaner and a soft cloth. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the DMX connections with a damp
cloth. Make sure that connections are thoroughly dry before linking equipment or supplying electric
power.
Troubleshooting
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out the following steps.
No Response to DMX/RDM
Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction.
01)
Check the DMX setting. Make sure that DMX addresses are correct.
02)
Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power.
Try your DMX control again.
03)
Determine whether the RDM Commander or light effect is at fault. Does the RDM Commander
operate properly with other DMX/RDM products? If not, take the RDM Commander in for repair. If it
operates properly, take the DMX cable and the light effect to a qualified technician.
Product Specifications
Model:
Showtec RDM Commander
Power supply:
9V DC, 500mA power adapter
Power consumption:
5W
Dimensions:
135 x 73 x 208 mm (LxWxH)
Weight:
0,6 kg
Details:
Onboard:
4 x 20-character LCD display
Control protocols:
DMX-512, DMX-1000K, RDM
Connections:
3-pin/5-pin XLR IN&OUT
Housing:
PVC
Max. ambient temperature
t
a
:
35°C
Max. housing temperature
t
B
:
70°C
Flight case:
Dimensions:
265 x 255 x 90 mm (LxWxH)
Weight:
1,1 kg
Summary of Contents for 50405
Page 29: ...28 Ordercode 50405 RDM Commander...
Page 30: ...29 Ordercode 50405 RDM Commander Notes...
Page 31: ...30 Ordercode 50405 RDM Commander...
Page 32: ...2015 Showtec...
